Stone Tile Cleaning & Restoration Llangybi

The original shine on Limestone tiles will progressively go dull. The dull appearance is caused by microscopic scratching on the surface of the stone where it's been walked over. Limestone Polishing is the best way to revive the initial appearance. We use diamond polishing to re-surface the tiles and rebuild the initial finish.

The majority of Limestone tile floors are not even since the tiles are not set level. We can grind off the uneven edges of the tiles, making the floor surface perfectly flat. Limestone tile grinding is a specialist procedure, that brings stunning results. The floor will appear like just one piece of Limestone.

Following grinding, the tiles will be at the same level the grout. A smooth Limestone finish is much easier to keep. Also, soil doesn't get stuck in the grout lines. If your Limestone floor has chips or cracks, we could repair them with resin fillers, colour matched with the Limestone. The particular restoration needed will be based on the current state of your Limestone floor.

Get more informationabout our Limestone cleaning Llangybi service including our comprehensive stone floor cleaning restoration treatments or Book your free Quote

Slate flooring is just one of the most well known types of natural stone, as it calls for less routine maintenance and cleaning. Slate floors need regular sealing to stop spills and soil marking the appearance.

We use a combination of machine and hand scrubbing to get rid of all traces of old soiled sealers and clean the floor. After the professional cleaning is completed,we then employ a lasting sealer to make the floor better to clean.

Some slate floors could be ground to a smooth finish.

Get more information about our Slate cleaning and sealing Llangybi work as well as our extensive stone cleaning  systems or Book a Quote

Victoran clay geometric floor tiles are installed in Victorian and Edwardian Hallways.

The tiles have a matt finish and obtain their colour through the clay utilized in their manufacture.

Due to their age, these floors have had plenty of wear and can have layers of various sealers.

The primary concerns with victorian floor tiles is removing several of oils, polishes, waxes, dirt and grime without doing damage to the floor.

After cleaning, the original colours of the floor tiles can look dull, therefore we apply a colour intensifying impregnating sealer to replace the initial depth of colour. Topical sealers and waxes will give the floor a sheen or glossy finish.

Find outabout our Victorian Minton Tiles cleaning and sealing Llangybi services including our extensive professional cleaningsolutions or Book a Quote

Porcelain is categorised as a ceramic, but created with alternative ingredients to standard ceramic tiles.

High quality Porcelain has really low porosity, this means less stains, less water damage and mold, and less need for sealing.

If the blend of ceramics is not correct, the surface of the tiles could be porous. just like natural stone floors. The minute surface pits make it hard to remove this soil.

We have the equipment and experience to eliminate this difficult to reach soil.

After cleaning, we apply specific Porcelain sealers to avoid this problem.

Solid colour Porcelain Tiles can be ground and polished, just like Granite or Stone.

Read more about our Porcelain Tiles Cleaning Llangybi floor restoration services as well as our comprehensive professional cleaning systems or Book a Quote.

Natural tone floor tile cleaning is hardly ever just cleaning, there is commonly more restoration required. Each type of natural stone features its own characteristics and restoration issues. Stone and tile floors have problems with traffic wear and damage, because individuals wander over them. In many cases, dirt, spots and foot traffic scrapes spoil floor's finish, consequently the need for stone restoration. Polished floors like granite, Stone and terrazzo reveal surface damage more rapidly because the shine gets dull from traffic marks. Permeable natural stone and tile that is sealed using a surface sealer will steadily suffer from wear damage.

Most stone and tile flooring has cement grout. Cement grout is softer compared to natural stone stone and tile and much more at risk of abrasion and chemical wear and tear. Many floors also frequently need crack, chip or hole repair.

Resurfacing takes away damage from etching and surface marks.We can get rid of the old finish from the natural stone, disclosing a brand new sparkling appearance.